Bang Switch by Liquid - Shortens your trigger pull by up to 50%
This part replaces the stock spool valve in the Planet Eclipse
m170r, eMek, MG100 and gMek markers.
1 Bang Switch (3way Spool)
1 #6-32 x 1/4 set screw (to replace the post travel trigger screw)
3 Spare 0'rings (to replace all o'rings on the Bang Switch)
**We recommend that a certified gun tech install this part.
The Bang Switch changes the firing point on your marker, making your marker fire closer to the front of the trigger pull. This allows you to remove up to 50% of the post travel that is normally behind the firing point in your trigger pull. No adjustable trigger alone will actually shorten your trigger pull like the Bang Switch does. While you do not need an adjustable trigger for the Bang Switch to change the firing point, you may not experience the full benefits without one.
More Detailed explanation-The 3way spool valve works in two stages of action. As you pull your trigger back, the first stage of action shuts off air travel to the back of the bolt, preparing the bolt to cycle. As you continue pulling the trigger back, the spool enters the second stage of action. Here it releases the air from the back of the bolt, allowing the bolt to cycle.
There is a small amount of unneeded travel between these two stages of action that the Bang Switch Eliminates. With the firing point occurring at an earlier stage in the trigger pull, there is no need for the trigger to continue past this point, so you can adjust your trigger set screw to stop your trigger from continuing to travel, hence shortening your trigger pull by up to 50%